Tuning Camshaft "Full Race" 30426NEU

Tuning Camshaft "Full Race"

Highly Recommend Using our Heavy Duty Valve Springs and Keeper Kit 

Camshaft 30426:

Total valve lift

Intake Valve / Exhaust Valve

11.57 mm / 11.41mm

Valve opens/closes
    24.3° before top dead center point / 60.1° after bottom dead center (Intake Valve)
    63.6° before b.d.c. / 25.0° after t.d.c. (Exhaust Valve)

Duration Intake Valve / Exhaust Valve

 264.4° / 268.6°

Lobe center Intake Valve / Exhaust Valve
107.9° after t.d.c. / 109.3° before t.d.c.

Tappet clearance (cold ) Intake Valve / Exhaust Valve

 0.10 mm / 0.15 mm
 
All specifications (angle) are referring to 1mm valve lift and 0mm valve clearance.

Notice: When installing the tuning-cam pay attention to the valve-to-piston clearance are met, a min.1.2mm at the intake valve at 10° before t.d.c and 1.7mm at  the exhaust valve at 10° after t.d.c.
 In the case the minimum clearance cannot be met, the valve pockets on the top of the piston have to be  milled.