Skip Navigation Website Accessibility
 

Tuning Camshaft "FULL RACE" Exchange 30426

Item is available
   
Quantity:    
Manufacturer #:30426
Sku:30426

Add to Cart

or call: (785) 263-1948
ONLY AVAILABLE WITH EXCHANGE OF OEM USEABLE CAM
Tuning Camshaft "full race" (in exchange for your OEM camshaft)
Recommend using heavy duty springs and titanium keepers

Camshaft 30426:

Total valve lift

Intake Valve / Exhaust Valve

11.57 mm / 11.41mm

Valve opens/closes
    24.3° before top dead center point / 60.1° after bottom dead center (Intake Valve)
    63.6° before b.d.c. / 25.0° after t.d.c. (Exhaust Valve)

Duration Intake Valve / Exhaust Valve

 264.4° / 268.6°

Lobe center Intake Valve / Exhaust Valve
107.9° after t.d.c. / 109.3° before t.d.c.

Tappet clearance (cold ) Intake Valve / Exhaust Valve

 0.10 mm / 0.15 mm
 
All specifications (angle) are referring to 1mm valve lift and 0mm valve clearance.

Notice: When installing the tuning-cam pay attention to the valve-to-piston clearance are met, a min.1.2mm at the intake valve at 10° before t.d.c and 1.7mm at  the exhaust valve at 10° after t.d.c.
 In the case the minimum clearance cannot be met, the valve pockets on the top of the piston have to be  milled.

Failure to do so will lead to a catastrophic engine failure and damage.