M6 Allen Screw Set for Crankcase Black Zinc Coated SR400 SR500 TT500 XT500 99-046

M6 Allen Screw Set for Crankcase, Black Zinc Coated

This alternative, set of motor screws, is not manufactured from A2 stainless steel. The reason; A2 - screws are less firm than for example 8.8 Allen screws; they are too
tight or if there is corrosion in the thread, you can strip it while applying the hardware; without warning.  
Galvanized 8.8 Allen, as well as aluminum screws, while overstretching announce clearly! Further, the drilling of sheared A2 screws with normal tools is almost 
impossible as the drill migrates into the softer motor housing and is directed unevenly.This can then cause even greater damage.