Skip Navigation Website Accessibility
 


K&N Racing Air Filter for Mikuni VM36 Round Slide Carburetor RU-1760 2-115

K&N Universal Round Straight Air Filters with Rubber End Cap

When selecting one of K&N's universal round straight air filters, you should consider the following dimensions: Mounting Flange Inside Diameter
This is the most critical dimension and should be very close to the outside diameter of the application's inlet flange. The flange will stretch up to
1/8 in. for those in-between sizes. Filter Diameter: This is the overall diameter of the filter; always use the largest diameter practical to insure
maximum filtration. Filter Length: This dimension is the length of the filter body only; it does not include the flange length; always use the longest
filter practical for maximum filtration. Flange Angle and/or Length: If no angle is listed in the specifications table, the flange is straight. Any angle
listed is in degrees and can be utilized when space is a problem. Flange Type: The location of the flange in relation to the O.D. of the filter is
sometimes offset to one edge of the filter for more clearance in an application.



Air Filter Shape Round
Filter Material Cotton Gauze
Filter Re-Oiling Amount 0.49 oz (14 ml)
Flange Angle 20 degrees
Flange Inside Diameter 2.438 in (62 mm)
Flange Length 2 in (51 mm)
Flange Type Angled
Flanges 1
Height 5 in (127 mm)
Inner Wire No
Outside Diameter 3.75 in (95 mm)
Package Contents 1 Air Filter
Package Quantity 1
Product Box Height 9.06 in (230 mm)
Product Box Length 5.56 in (141 mm)
Product Box Width 4.56 in (116 mm)
Product Style Round Straight Universal Air Filter
Top Material/Finish None
Top Style Rubber
Weight 0.9 lb (0.4 kg)