Electric Start Conversion XT500

Each “XSTART” kit includes a 1kw starter and its relay installed on its housing, a drive chain, a free wheel, a damped connecting piece, all the necessary accessories and a detailed and illustrated manual for quick and easy assembly.
Removal of the original toolbox will be required in order to install the lithium battery in its place. Assembly time is about 3 hours 

• A very light rechargeable lithium battery with a large capacity (89800mAh).
• The starting current is 300A and the peak current is 600A for 3s.
• Temperature range -20? and ~+60?.
• An external 220v-15v charger that you plug into the mains.

This battery can be recharged either in situation or by taking it home with you because it can be disassembled very quickly without tools. We advise you to charge the battery each time you return to the garage following a common practice in telephony or portable electric tools.

Depending on the temperature, this battery can provide enough power for 100 starts between two recharges.

Recommendations: Make sure that the magnetic fly wheel is in good condition.

• The battery of the electric starter should be charged using the charger supplied before starting up for the first time after the winter break
• The decompression lever must be pulled for the first second of each starting process to avoid putting unnecessary strain on the battery
• The electric starter is to be regarded as a starting aid instead of the kick-starter and cannot compensate for any other vehicle defects (e.g. faulty ignition system).

VERY SIMPLE INSTALL CLICK HOW TO LINK HERE 

https://youtu.be/C65u9pCDrTA?si=_n1YRK2uZ1o0CsTF

FAQ:

Is it necessary to pay attention to the TDC sight glass to start the motorbike?

No, when using the starter, the position of the piston/camshaft is irrelevant.

Is it necessary to re-adjust the ignition when installing the XSTART kit?

No, the installation of the kit does not require any adjustment of the ignition, the pole wheel is not dismantled.

Is it necessary to pull the deco lever when using the starter?

No, but it is recommended to reduce the power consumption of the starter motor and the battery.